Tag Archives: Exam

How to Best Prepare For the Math Portion of the SAT Exam

Posted on by

The SAT Exam allows colleges to compare different students from different schools on the same scale. For this reason alone, it is important for students to study methodically and thoroughly for this exam. The math portion of the exam is weighed very heavily when the student is interested in pursuing a college degree involving mathematics, science, finance, technology, or related fields.

Like other standardized exams, the SAT Exam is a test that can be studied for quite strategically. This is because the math topics included in the exam are well-defined and fixed. Moreover, the same question types appear from year to year, and so they make great practice material for students. Therefore, the logical way to master the math portion of the SAT Exam is to master the topics that are included on the test.

In order to best understand the topics on the exam, it is necessary to first review the textbook(s) that describe the concepts in detail. Study the relevant chapters until the material makes sense to you. Once you are done studying the relevant chapters, move on to the problems at the end of the chapter. Attempt to solve as many problems as possible until you are fully confident that you have mastered the solving procedure.

After you are done reviewing the material and practicing on the problems in your textbook, it is necessary to work on an actual math SAT Exam. Take this exam following the rules that would be followed on test day. In other words, time yourself when you are working within a section, and take the required breaks (as allowed) between math sections. After a sample SAT exam is completed, grade the exam and study your results. Note if there is a specific question type that appears to be causing problems or if there is a specific subject topic that continues to baffle you.

At this point, it may be appropriate to consider specialized, focused tutoring to fill in any gaps in comprehension. The tutor would be able to focus on SAT math and to place extra attention on the weaknesses until understanding of the concepts is improved. The tutoring may be either in-person or online. Recently, online tutoring has become more popular, as it is more convenient for both tutor and student. Moreover, online tutoring tends to be more affordable than in-person tutoring.

In an online tutoring session, the tutor and student can work on the same interactive whiteboard and share problems, answers, and explanations. Using the computer’s microphone or a telephone, the tutor and student can communicate via voice to further communicate with each other. The tutoring session occurs in a private, interactive classroom and can be scheduled at the student’s convenience.

Cisco CCNP / BSCI Exam Tutorial: Filtering BGP Updates With Prefix Lists

Posted on by

A major part of your BSCI and CCNP exam success is mastering BGP, and that includes filtering BGP routing updates. In this tutorial, we’ll take a look at how to filter BGP updates with prefix lists.

R4 is advertising three networks via BGP. The downstream router R3 sees these routes and places them into its BGP table as shown below. R3 has two downstream BGP peers, R1 and R2, and is advertising itself as the next-hop IP address for all BGP routes sent to those two routers.

R4(config)#router bgp 4

R4(config-router)#network 21.0.0.0 mask 255.0.0.0

R4(config-router)#network 22.0.0.0 mask 255.0.0.0

R4(config-router)#network 23.0.0.0 mask 255.0.0.0

R3#show ip bgp

BGP table version is 4, local router ID is 3.3.3.3

Status codes: s suppressed, d damped, h history, * valid, > best, i –
Internal

Origin codes: i – IGP, e – EGP, ? – incomplete

Network Next Hop Metric LocPrf Weight Path

*> 21.0.0.0 10.2.2.4 0 0 4 I

*> 22.0.0.0 10.2.2.4 0 0 4 I

*> 23.0.0.0 10.2.2.4 0 0 4 I

R3(config)#router bgp 123

R3(config-router)#neighbor 172.12.123.1 next-hop-self

R3(config-router)#neighbor 172.12.123.2 next-hop-self

In turn, both R1 and R2 have these three routes in their respective BGP tables.

R2#show ip bgp

BGP table version is 4, local router ID is 2.2.2.2

Status codes: s suppressed, d damped, h history, * valid, > best, i –
Internal

Origin codes: i – IGP, e – EGP, ? – incomplete

Network Next Hop Metric LocPrf Weight Path

*>i21.0.0.0 172.12.123.3 0 100 0 4 I

*>i22.0.0.0 172.12.123.3 0 100 0 4 I

*>i23.0.0.0 172.12.123.3 0 100 0 4 I

R1#show ip bgp

BGP table version is 4, local router ID is 19.1.1.1

Status codes: s suppressed, d damped, h history, * valid, > best, i –
Internal

Origin codes: i – IGP, e – EGP, ? – incomplete

Network Next Hop Metric LocPrf Weight Path

*>i21.0.0.0 172.12.123.3 0 100 0 4 I

*>i22.0.0.0 172.12.123.3 0 100 0 4 I

*>i23.0.0.0 172.12.123.3 0 100 0 4 I

If we wanted R3 to receive all three of these routes from R4 but not advertise all of them to R2 and R1, we’ve got a couple of options on how to block these routes. Cisco’s recommendation is the use of prefix-lists, and once you get used to the syntax (which you should do before taking and passing the BSCI), you’ll see they are actually easier to use than access-lists.

In this case, we’re going to configure R3 to send only the route to 21.0.0.0 to R1 and 23.0.0.0 to R2. However, we do want these two routers to get any future routes that R4 advertises into BGP.

Since R1 and R2 will learn about these routes from an iBGP neighbor, they will not advertise the routes to each other.

On R3, we’ll write a prefix-list that denies 22.0.0.0/8 and 23.0.0.0/8, but permits all other routes. After applying the prefix list as shown, R1 sees only the 21.0.0.0 /8 route.

R3(config)#ip prefix-list FILTER_R1 deny 22.0.0.0/8

R3(config)#ip prefix-list FILTER_R1 deny 23.0.0.0/8

R3(config)#ip prefix-list FILTER_R1 permit 0.0.0.0/0 le 32

R3(config)#router bgp 123

R3(config-router)#neighbor 172.12.123.1 prefix-list FILTER_R1 out

R3#clear ip bgp * soft

R1#show ip bgp

BGP table version is 6, local router ID is 19.1.1.1

Status codes: s suppressed, d damped, h history, * valid, > best, i –
Internal

Origin codes: i – IGP, e – EGP, ? – incomplete

Network Next Hop Metric LocPrf Weight Path

*>i21.0.0.0 172.12.123.3 0 100 0 4 I

The paths to 22.0.0.0/8 and 23.0.0.0/8 have been successfully filtered.

We’ll do the same for R2, except the route not being expressly blocked is 23.0.0.0/8. The line “ip prefix-list permit 0.0.0.0/0 le 32” is the prefix list equivalent of a “permit any” statement in an ACL.

R3(config)#ip prefix-list FILTER_R2 deny 21.0.0.0/8

R3(config)#ip prefix-list FILTER_R2 deny 22.0.0.0/8

R3(config)#ip prefix-list FILTER_R2 permit 0.0.0.0/0 le 32

R3(config)#router bgp 123

R3(config-router)#neighbor 172.12.123.2 prefix-list FILTER_R2 out

R3#clear ip bgp * soft

R2#show ip bgp

BGP table version is 6, local router ID is 2.2.2.2

Status codes: s suppressed, d damped, h history, * valid, > best, i –

Internal

Origin codes: i – IGP, e – EGP, ? – incomplete

Network Next Hop Metric LocPrf Weight Path

*>i23.0.0.0 172.12.123.3 0 100 0 4 I

The paths to 21.0.0.0/8 and 22.0.0.0/8 have been successfully filtered.

To see the prefix lists configured on a route as well as the order of the statements in each list, run show ip prefix-list.

R3#show ip prefix-list

ip prefix-list FILTER_R1: 3 entries

seq 5 deny 22.0.0.0/8

seq 10 deny 23.0.0.0/8

seq 15 permit 0.0.0.0/0 le 32

ip prefix-list FILTER_R2: 3 entries

seq 5 deny 21.0.0.0/8

seq 10 deny 22.0.0.0/8

seq 15 permit 0.0.0.0/0 le 32

Get some hands-on practice with prefix lists and you’ll quickly master them. Prefix lists are an important part of working with BGP in the exam room and production networks, so it’s vital that you are comfortable working with them.